Alen Yacht launched one of the last boats of the Alen 45 model in July. Developed using the design details of the Alen 55, the new model Alen 45 draws attention with its unique line and customization options. The interior and exterior living spaces of the new model, which will make its world premiere at the Monaco Yacht Show, bear the signature of Alp ÖZCAN, CEO of Alen Yacht. Specialized in the production of open motor yachts, Alen Yacht's 45 model provides confidence and performance with its strong and robust hull as a day cruiser or megayacht tender. Alen 45, which appeals to daily cruises and has a capacity of 12 people, stands out among the boats in its class with its very large and useful deck for a boat of this size.
Alen 45, of which 3 hulls are currently in production, has a ceiling height of two meters in the interior living spaces. The Alen 45, with its cabin located under the bow, full volume cooker, seating areas under the hardtop and open spaces, is entirely made of composite materials. 13.70m long and 4.10m wide, with an available fuel capacity of 1200 lt. and water capacity of 400 lt. When two Volvo engines of 435 HP each are installed, the boat can cruise at a cruising speed of 30 knots and increase its performance up to 39 knots.
Kendine özgü çizgileri bulunan Alen 45, hardtop ve open seçenekleriyle üretiliyor. Hafif ve dayanıklı bir gövdesi bulunan teknede, gövde ve üst binada tüm kompozit ve polyester parçalar infüzyon teknolojisiyle dökülüyor. Gövdede kompozitle birlikte kullanılan AIREX Core köpük uygulaması sayesinde hem polyester %50 oranında daha az kullanılmış oluyor hem de ortaya daha hafif bir tekne çıkıyor. Hafif olması sayesinde daha küçük makineler kullanılarak yakıt tasarrufu da sağlanıyor. Modellerde koyu renk tercih ediliyor olsa da isteğe göre her renkte boya uygulanabiliyor. Alen Yacht tüm teknelerini, matlaşma ve soluk bir görüntü oluşmasına karşı, jelkot yerine boyalı olarak üretiyor. Boyama özel odalarda basınçla yapılıyor ve üzerine koruma cilası atılıyor. Teknede kullanılan tüm metaller paslanmaya karşı, krom malzemeden el yapımı ve özel olarak üretiliyor. Tüm süreçleri tamamlanan bir teknenin üretimi yaklaşık 3,5- 4 ay sürüyor.
Alen 45 has a cabin on the lower deck, which is sufficient for short stays. There is a 3-step, teak wood ladder with chrome handles. LED lighting on the sides of the ladder allows you to safely descend to the cabin in the dark, and together with the wooden teak steps and light-colored walls, it gives a pleasant appearance to the eye. To port, there is a luxurious bathroom with Corian sink, teak furniture and chrome shower set; on the opposite side is a chest of drawers with a refrigerator, and just beyond is a 2.60 by 2.10 bed. LED lights on the ceiling are used for cabin lighting. The ceiling in the cabin and bathroom is approximately 1.90-2.00 meters high.
Alen 45 Technical Specifications
Total length: 13.70 M
En: 4.10 M
Draft: 1.00 M
Material: Full Composite / AIREX Core
Weight 12 Tons
Fuel capacity:1200 L
Clean water capacity:400 L
Sewage capacity:120 L
Engines 2 x Volvo IPS 600
Maximum speed 39 Knot
Cruising Speed 30 Knot
Range: 300 NM
CE certificate: Category “B”
Deck capacity 12 persons
Exterior and interior design: Alen Yacht
English